No Products in the Cart
Use the coupon ‘web25’ for $2 off any purchase! Shop Now
Nearly every Skutt kiln uses a 8” high stand. The EnviroVent 2 is designed to fi t under this 8” stand. If your stand is lower you can either shim the legs until it is 8” off the ground or replace it with a correctly sized Skutt Stand. If your stand is higher than 8” you can shim the plenum cup up so the bottom of the base is 8” from the bottom of the kiln or replace the stand with one with 8” clearance.
On certain model kilns it is not possible to mount the vent cup under the kiln and it will be necessary to mount the cup on the side of the kiln. In order to get the positive effects of Downdraft Ventilation you will want to mount it as low on the side of the kiln as possible. You will not need the plenum stand or plenum spring since the plenum cup will be screwed into the side of the kiln. Don’t worry about the exposed hole at the bottom of the cup.
